The Parts Of Plastic Pulverizer Machine
1. Simple adjustment of cutting gap
2. Fast and easy replacement and adjustment of discs
3. Easy temperature control
4. Low drive power, cost effective operation
5. High throughput
6. Long service life of the disc when sharpened
7. Low residence time means lower thermal stress on the process
1, With water spray cooling system. it is suitable for processing
of thermal sensitive material. With unique water spray cooling
system. When the temperature of main machine is higher than setting
temperature, water spray automatically until the temperature
Note: less of water spray into to machine will be dryed quickly
which will not affect material properties. It can be installed by
2, The raw material become power by vibration principle of
ultrasonic vortex wave pressure which is from the high speed
rotating of main shaft.
The material is conveyed to screening system by wind conveying. The
coarse materal is back to the milling chamber automatically, then
3, The blade adopt high quality steel which is treated by
heating.after heat treatment, with good abrasion resistance. It is
suitable for continuous running.
4, This size of machine is small with compact structure, fully
sealed, no dust overflow.
5, The material is transferred based on own wind pressure.
|Main motor||Rotating motor||Φ610mm|
High and low voltage protection
Dust collecting bag protection with 9 bags